e-Station BC6 Balance Battery Charger/Discharger
	Quantity in Basket: none Code: BANBC6 Price: $139.99
	Quantity:
Specification Operating voltage  DC 11~18 volts  AC 100~240V, 50/60Hz Charge/discharge power  max. 50/5 Watts NiCd/MH  1~15 cells LiIo/LiPo/LiFe  1~6 series  Pb  2~20V Charge current  0.1 to 5.0A Discharg current  0.1 to 1.0A No. of cycle  1 to 5 times Battery data memory  up to 5 data Weight  960g Dimension  160x120x40 mm     User's setting-up parameters  Lithium battery voltage type  LiIo:3.6V, LiPo:3.7V, LiFe:3.3V  NiCd Delta-peak voltage sensitivity  5 to 20mV  NiMH Delta-peak voltage sensitivity  5 to 20mV  Battery temperature cut-off  20 to 80C or OFF  Waste time between charge/discharge  1 to 60 min.  Integral timer limit for safety  10 to 720 min.or OFF  Maximum charging capacity limit for safety  10 to 9990mAh or OFF  Key beep and buzzer sound  ON/OFF  Input DC power low alert  10 to 11V     -  Optimized operating software    When charging or discharging, BC6 has an 'AUTO' function that sets the feeding current or the cell count of Lithium battery automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.   -  Dual input power    BC6 employs the circuit that can be operated with the input power of AC(Alternating Current) or DC(Direct Current). For AC input, it contains a AC-DC switching power supplier which has 5A of power capacity and maximum output power of 50Watts for charging. As a result it can charge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 5.0A.   -  Individual voltage balancer for Lithium batteries inside    BC6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.                  ** When the 'Balance charge' mode being performed, the balancing adapter should be connected to the balancing tab of battery pack, as well as the charger's charging lead should be connected to the output of battery pack.   And also, please pay attention to the polarity of the battery pack's output which goes to the charger's output. If it is reversed, the short-circuit can be happened on the battery pack.   -  Balance individual cells on discharge    BC6 also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.   -  Accept various types of Lithium battery    BC6 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.   - Lithium battery 'Fast' and 'Storage' mode    You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.   -  Data store/load    For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.   -  Cyclic charging/discharging    Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.   -  PC based analysis using USB communication    For technical expert, BC6 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.   - Robust outer aluminum case   High-quality aluminum case is durable and very efficient to cool out the internal heat